BAILII is celebrating 24 years of free online access to the law! Would you
consider making a contribution?
No donation is too small. If every visitor before 31 December gives just £1, it
will have a significant impact on BAILII's ability to continue providing free
access to the law.
Thank you very much for your support!
[New search]
[Help]
STATUTORY RULES OF NORTHERN IRELAND
2007 No. 41
TRANSPORT
The Private Crossings (Signs and Barriers) Regulations (Northern Ireland) 2007
| |
Made |
26th January 2007 | |
| |
Coming into operation |
2nd March 2007 | |
The Department for Regional Development in exercise of the powers conferred on it by Section 5 of, and Schedule 1 to, the Railway Safety Act (Northern Ireland) 2002[1] and of every other power enabling it in that behalf hereby makes the following Regulations:
PART 1
PRELIMINARY
Citation and commencement
1.
These Regulations may be cited as the Private Crossings (Signs and Barriers) Regulations (Northern Ireland) 2007 and shall come into operation on 2nd March 2007.
Interpretation
2.
In these Regulations—
"crossing" means a level crossing;
"crossing operator" means an operator of a railway that is crossed in any place by a private road or path;
"the 2002 Act" means the Railway Safety Act (Northern Ireland) 2002;
"the 1997 Regulations" means the Traffic Signs Regulations (Northern Ireland) 1997[2].
PART II
GENERAL PROVISIONS
Crossing Signs to be of the size, colour and type shown in diagrams
3.
Subject to the provisions of these Regulations, for the purposes of section 5 of, and Schedule 1 to, the 2002 Act, a crossing operator may cause or permit the placement on or near a private road or path of a crossing sign of a size, colour and type described and shown —
(a) in a diagram in Schedule 1; or
(b) in a diagram in Schedule 3 to the 1997 Regulations;or
(c) in one of the diagrams numbered 601.1, 602, 1001, 1002.1, 1003, 1003.2, 1004, 1004.1, 1005.1, 1005, 1008, 1008.1, 1010, 1012.1, 1013.1, 1014, 1022, 1023, 1026, 1045, in Schedules 2 and 6 to the 1997 Regulations.
PART III
CROSSING SIGNS SHOWN IN SCHEDULE 1
Colours of backs of crossing signs
4.
The back of any crossing sign shown in a diagram in Schedule 1 and any post or other structure specially provided for mounting the sign shall be coloured black or grey.
Dimensions
5.
—(1) Any variation in a dimension specified in Schedule 1 shall be treated as permitted by these Regulations if the variation is not more than 5% more or less than the dimension specified.
(2) In the diagrams in Schedule 1 the dimensions given are expressed in millimetres.
Permitted variants
6.
—(1) Where the circumstances so require the indication given by a crossing sign shown in a diagram in Schedule 1 may be varied in the respect (if any) shown below the diagram relating to that sign.
(2) Where a crossing sign in a diagram in Schedule 1 contains an indication as to the penalty relating to a failure to obey the requirements on that sign, the indication of the penalty may be varied when necessary to accord with changes in the legislation governing the nature and level of penalty.
Illumination of Crossing Signs
7.
—(1) Subject to paragraphs (2) and (3) of this regulation all parts other than the back of every crossing sign shown in a diagram in Schedule 1 shall be illuminated by means of retro reflecting material.
(2) No retro reflecting material shall be applied to—
(a) any part of a crossing sign coloured black; or
(b) the red and green lights in the crossing signs shown in diagrams 107 and 108 and prescribed in regulation 8.
(3) Retro reflecting material need not be applied to a crossing sign at a crossing that is not used by motor vehicles.
Miniature stoplights
8.
—(1) The crossing signs shown in diagrams 107 and 108 shall contain red and green lamps which are internally illuminated by a steady light in such a manner that—
(a) when one light is illuminated the other is not illuminated;
(b) the green lamp is and remains illuminated for so long as no railway vehicle is approaching the vicinity of the crossing from either direction; and
(c) the red lamp is and remains illuminated for so long as the green lamp is not illuminated.
(2) The lenses of the lamps shall be—
(a) circular and not less than 60 millimetres in diameter; or
(b) rectangular with each side measuring not less than 60 millimetres; and the distance between the edges of the lenses of the green lamp and the red lamp shall be not less than 40 millimetres.
(3) The information, warnings, requirements and prohibitions conveyed by the lamps described in paragraphs (1) and (2) shall be as follows—
(a) the red lamp when illuminated shall convey the warning that a railway vehicle is approaching the vicinity of the crossing and the prohibition that persons must not proceed across the crossing;
(b) the green lamp when illuminated shall convey the information that no railway vehicle is approaching the vicinity of the crossing and persons may proceed across the crossing;
(c) if neither the red nor green lamp is illuminated persons should either telephone the crossing operator or proceed across the crossing with caution after having ascertained that no railway vehicle approaching the vicinity of the crossing in accordance with the instructions shown on the sign.
PART IV
BARRIERS
Barriers to be of the character described in Schedule 2 or Schedule 3
9.
For the purposes of section 5 of, and Schedule 1 to, the 2002 Act, where a railway is crossed in any place by a private road or path, the operator of that railway may cause or permit a barrier to be placed on or near the private road or path near the crossing if it is, in the case of a gate, of the character described in Schedule 2, or, in the case of any other form of barrier, of the character described in Schedule 3.
PART V
CROSSING SIGNS RELATING TO TELEPHONES
Placement of signs relating to telephones
10.
The authority which these Regulations give for the placement of crossing signs relating to telephones at a crossing shall only apply where telephones are, or are to be, provided on both sides of the crossing and connected direct to the crossing operator.
Sealed with the Official Seal of the Department for Regional Development on
26th January 2007.
L.S.
B. R. D. White
A senior officer of the Department for Regional Development
SCHEDULE 1(Regulation 3)
CROSSING SIGNS
Click here to view image 1 of 20
Instructions for Miniature Stop Light with barriers
Enter Raise Key Switch
Diagram 97
Click here to view image 2 of 20
Instructions for Miniature Stop Light with barriers
Enter Lower Plunger
Diagram 98
Click here to view image 3 of 20
Instructions for Miniature Stop Light with barriers
Enter Raise and Exit Lower Plungers
Diagram 99
Click here to view image 4 of 20
Diagram 100
Click here to view image 5 of 20
Black lettering on white background with black border
Warning sign for a non-vehicular crossing
Diagram 101
Click here to view image 6 of 20
Upper section — White lettering on red background
Lower section — Black lettering on white background
Instructions for use at a vehicular crossing without a telephone
Diagram 102
Permitted variant: Telephone number of crossing operator may be added.
Click here to view image 7 of 20
Upper section — White lettering on red background
Lower section — Black lettering on white background
Instructions for use at a vehicular crossing with a telephone
Diagram 103
Click here to view image 8 of 20
Black lettering and border on white background
Operating instructions for barrier
Diagram 104
Click here to view image 9 of 20
Black lettering and border on white background
Sign indicating the penalty for failure to shut the gate at a vehicular crossing
Diagram 105
Click here to view image 10 of 20
Red background
Target for crossing gate
Diagram 106
Click here to view image 11 of 20
Black lettering and border on white background
Sign for use with miniature stop lights at a crossing with a telephone
Diagram 107
Permitted variant: The lenses of the lamps may be rectangular instead of circular
Click here to view image 12 of 20
Black lettering and border on white background
Sign for use with miniature stop lights at a crossing without a telephone
Diagram 108
Permitted variant: The lenses of the lamps may be rectangular instead of circular
Click here to view image 13 of 20
Black lettering and border on white background
Instructions for use at a crossing with miniature stop
lights and user-operated gates
Diagram 109
Click here to view image 14 of 20
Black lettering and border on white background
Instructions for use at a crossing with miniature stop lights and user-operated barriers
Diagram 110
Click here to view image 15 of 20
Black lettering and
border on white background
Reminder at a crossing
with user-operated gates
Diagram 111
Click here to view image 16 of 20
Black lettering and
border on white background
Reminder at a crossing
with user-operated barriers
Diagram 112
Click here to view image 17 of 20
Black lettering and border on white background
Instructions to non-vechicular traffic at a crossing with miniture stop light
Diagram 113
Click here to view image 18 of 20
Black lettering and border on white background
Instructions at a crossing with gates
Diagram 114
Click here to view image 19 of 20
Upper section — Blue exclamation mark inside white circle
Lower section — White lettering on blue background
Warning sign for use on bi-directional double track
Diagram 115
Click here to view image 20 of 20
Black lettering on white background with red border
Warning sign for withdrawal of timetabled services
Diagrams 116
SCHEDULE 2(Regulation 9)
GATES
1.
Where gates are used, each gate shall (by itself or with another gate on the same side of the railway) be long enough to extend across the full width of a private road or path, and shall be pivoted to open away from the railway.
2.
When a gate is closed, the uppermost surface of the gate shall not be less than 1350 millimetres above the road surface at the centre of the private road or path and the under clearance between each gate and the road shall not exceed 150 millimetres. Where the private road or path is an unmetalled track, the under clearance between the gate and the ground shall be no greater than 150 millimetres than is reasonably necessary, having regard to the need to avoid the gate grounding during opening and closing movements.
3.
Where a gate is not installed solely for use by pedestrians, it shall be furnished with suitable mechanisms for securing it in the open and in the closed positions.
4.
So far as reasonably practicable, a gate shall be constructed so as to be strong enough to withstand distortion or fracture caused by wind pressure or by a farm animal, and, subject thereto, it shall be as light in weight as possible.
SCHEDULE 3(Regulation 9)
BARRIERS OTHER THAN GATES
1.
Where barriers are used, they shall when lowered across a private road or path be long enough to extend either—
(a) across the full width of the private road or path, or
(b) from the left-hand side of the private road or path (as seen from a vehicle approaching the crossing) to a point as close as possible to the centre of the private road or path as is consistent with allowing a clear passage at least 3 metres wide between the tip of the barrier and the other side of the private road or path.
2.
When a barrier is lowered its uppermost surface shall be not less than 900 millimetres above the road surface at the centre of the private road or path and the under clearance between a barrier and the road surface shall not exceed 1000 millimetres.
3.
A barrier shall be provided with means to raise it and hold it in the raised position and means to release the holding mechanism. A barrier may be so linked with any other barrier at the crossing that the barriers can be raised or lowered simultaneously from either side of the crossing.
4.
A cover shall be provided for each pivot post for the purposes of guarding against danger to any person from the operating mechanism and the moving parts of the barrier machine.
5.
The barriers when lowered shall display on both front and rear faces alternate red and white bands each approximately 600 millimetres long and to the full depth of the barriers. A strip of retro reflecting material not less than 50 millimetres deep, in colour matching that of the bands, shall be provided along the full length of each band.
6.
The barriers may be fitted with skirts which fence in the space between the barriers and the road surface. Skirts shall be of a light colour.
7.
Electric lamps may be fitted to the barriers and each lamp shall show a red light, when illuminated, in each direction along the private road or path.
8.
—(1) So far as reasonably practicable—
(a) a barrier shall be constructed so as to be strong enough to withstand distortion or fracture, and
(b) a skirt fitted to a barrier shall be capable of withstanding damage, caused by wind pressure or by a farm animal.
(2) Subject to sub-paragraph (1) above, a barrier (with a skirt, if fitted) shall be as light in weight as possible.
EXPLANATORY NOTE
(This note is not part of the Regulations)
Section 5 of, and Schedule 1 to, the Railway Safety Act (Northern Ireland) 2002 authorises the operator of a railway that is crossed by a private road or path to cause or permit the placement near the crossing of crossing signs or barriers that are prescribed in Regulations made by the Department for Regional Development.
These Regulations prescribe crossing signs and barriers for the purpose of section 5 and Schedule 1. Any person who fails to comply with any requirement, restriction or prohibition conveyed by a crossing sign lawfully placed on or near a private road or path near a place where it crosses a railway shall be guilty of an offence under the Railway Safety Act (Northern Ireland) 2002 and shall be liable on summary conviction to a fine not exceeding level 3 on the standard scale (£1000).
These Regulations have been notified to the European Commission pursuant to European Parliament and Council Directive 98/34EC of 22 June 1998 (O.J. No. L204, 21. 7.98, p. 37) as amended by European Parliament Council Directive 98/48 of 20th July 1998 (O.J. No. L217, 5.8.98, p. 18) laying down a procedure for the provision of information in the field of technical standards regulations and of rules on Information Society services.
Notes:
[1]
2002 c. 8 (N.I.)back
[2]
S.R. 1997 No. 386back
ISBN
978 0 337 96839 6
| © Crown copyright 2007 |
Prepared
21 February 2007
|
BAILII:
Copyright Policy |
Disclaimers |
Privacy Policy |
Feedback |
Donate to BAILII
URL: http://www.bailii.org/nie/legis/num_reg/2007/20070041.html
