 |
[Home] [Databases] [World Law] [Multidatabase Search] [Help] [Feedback] | |
United Kingdom Statutory Instruments |
||
|
You are here: BAILII >> Databases >> United Kingdom Statutory Instruments >> The Locomotives etc. Regulations 1906 (Metrication) Regulations 1981 No. 1327 URL: http://www.bailii.org/uk/legis/num_reg/1981/uksi_19811327_en.html |
||
[New search] [Help]
Statutory Instruments
HEALTH AND SAFETY
Made
9th September 1981
Laid before Parliament
22nd September 1981
Coming into Operation
1st November 1981
The Secretary of State, in exercise of the powers conferred on him by sections 49(1), (2) and (4) and 82(3)(a) of the Health and Safety at Work etc. Act 1974(1) ("the 1974 Act") and of all other powers enabling him in that behalf and for the purpose of giving effect without modifications to proposals submitted to him by the Health and Safety Commission under section 11(2)(d) of the 1974 Act after the carrying out by the said Commission of consultations in accordance with section 50(3) of that Act, hereby makes the following Regulations:-
1.-(1) These Regulations may be cited as The Locomotives etc. Regulations 1906 (Metrication) Regulations 1981 and shall come into operation on 1st November 1981.
(2) In these Regulations, "the principal Regulations" mean
2. The provisions of the Regulations specified in the Schedule to these Regulations in column 1 shall be amended by substituting for the measurements set out opposite thereto in column 3 the measurements set out in the corresponding entry in column 4.
3. Where any plant in existence or under construction immediately before the coming into operation of these Regulations complied with the requirements of the principal Regulations as then in force, then that plant shall be deemed to comply with the requirements of the principal Regulations as amended by these Regulations.
Signed by order of the Secretary of State.
David Waddington
Joint Parliamentary Under Secretary of State
Department of Employment
9th September 1981
Regulation 2
| 1 | 2 | 3 | 4 |
|---|---|---|---|
| Regulation to be amended | Subject matter of measurement | Present measurement | Measurement to be substituted |
| Locomotives and Waggons (Used on Lines and Sidings) Regulations 1906 | |||
| Definition | Definition of Gantry | 6 feet | 2 metres |
| Application | Minimum gauge of rail to which regulations apply | 3 feet | 920 millimetres |
| Regulation 9 | Distance between materials and line of rails | 3 feet | 920 millimetres |
| Maximum distance between recesses where the materials exceed that length | 20 yards | 20 metres |
These Regulations amend the Locomotives and Waggons (Used on Lines and Sidings) Regulations 1906 by substituting measurements expressed in metric units for measurements not so expressed. The substituted measurements preserve the effect of the original provisions except to the extent necessary to obtain amounts expressed in convenient and suitable terms.
Regulation 3 provides that the amendments do not relate to plant which was in existence or under construction immediately before the coming into operation of these Regulations if that plant complied with the then existing requirements.
section 49 was amended by the Employment Protection Act 1975 (c. 71), section 116 and Schedule 15, paragraph 15.